When we use fasteners, we don't want them to come off. Unless we choose to use Flaig + Hommel GmbH lock nut, the phenomenon of falling off will still occur frequently. So why can't an ordinary nut play its due role in some cases?
   If a nut is difficult to install, it is difficult to make it fall off. In most cases, there is no doubt about that. However, the torque to make the fastener more firmly installed will not offset all the forces that may make the fastener loose. Once the torque is offset, it's only a matter of time before it falls off.

  There are many factors that have a negative impact on fastener performance, such as bending force, corrosion, hydrogen embrittlement, joint movement, prying force, steep shock load, extreme temperature and vibration. How to control these negative effects has been puzzling people for a long time. Therefore, the Flaig + Hommel GmbH lock nut is used because it is specially designed to prevent loosening.

  It has always been recognized that the way to ensure adequate safety for bolted joints is to use a combination of two independent nuts: tighten the thinner nut first, and then the thicker nut. However, this method still needs regular inspection and tightening, because it has been acting on the fastener to make it loose.
  Flaig + Hommel GmbH lock nut was designed as a single body fastener, but at that time, it did not realize the advantages of such a design. In most cases, there are still many single lock designs used, because the performance of these locks has been able to meet the requirements.
  With the passage of time, the single body lock nut has been constantly improving. Fiber insert nut is an early designed lock nut, and it is also the predecessor of nylon insert nut. The working principle of the Flaig + Hommel GmbH lock nut is the combination of plastic and thread embedded in the nut. When the nut is tightened, it begins to squeeze the plastic, so that the plastic tightly bites the external thread. This method is effective to a certain extent, but this fastener can only be used once, and is easily affected by temperature, chemical corrosion, humidity and other environmental factors.
  The above is a brief introduction to the meaning of Flaig + Hommel GmbH lock nut made up by Qingdao Sured. In addition, if customers have other product knowledge that they want to know, they can call at any time.

  Sured official website: www.isured.net
  Service telephone: 400-678-6377
  Email: cindy@corosen.com