Anti-shear reinforced hose clamp, including a band locking device, the band itself is wound to form a loop for tightening the hose, and the locking device locks the ends of the wound band at both ends The structure is characterized in that the cuff of the product includes a straight portion consistent with its width direction, and both sides of the cuff are recessed toward the center of the loop formed by the cuff winding to form a connection with the straight portion. The side edge of the bent portion of the product extends radially outward of the loop formed by the cuff winding. This product can prevent the hose from shearing and destroying the hose, and can effectively prevent the hose from loosening due to temperature changes and vibration.

The hose clamp includes a strip-shaped clamp main body, and a tongue and tongue are made at the inner end of the clamp main body. The innovation is: at the inner end of the clamp main body, all tongue protrusions and two A nose-shaped protrusion, a cutout protrusion, a rectangular hole groove, a corrugated protrusion and a rectangular cutout guide groove are sequentially formed from the end to the outer end of the clamp body in the original state of the clamp body in the original state The tongue cutting protrusion made at the inner end is embedded in the rectangular hole groove made at the outer end of the clamp body. Under working conditions, the tongue and tongue made at the inner end of the clamp body is guided and inserted into the outer end of the clamp body. In the rectangular notch guide groove, one of the nose-like protrusions made at the inner end of the clamp body is clamped in the mounting hole at the lower part of the notch protrusion made at the outer end of the clamp body. This product has a reasonable structure design, has anti-off function, tongue and tongue guide function and deformation compensation function. It also has the advantages of convenient installation, easy processing and production, and low cost. It is a highly innovative hose clamp.